No. 28 Daccas The Black Knight Green Black [油性塗料 - Daccas 黑騎士綠黑色] (ダッカス・ザ・ブラックナイトグリーンブラック) 15 ml

Color: Daccas The Black Knight Green Black

Characteristics:

System: Lacquer Based Paint

Combination Recommended Series:

For dilution, we recommend using the dedicated "Born Paint Thinner (Standard) 300 ml".

* Three bottles of this paint are required for a full paint job on the HSGK 1/72 "Daccas The Black Knight." model kit.

* Two bottles of this paint are required for a full paint job on the HSGK 1/100 "Daccas The Black Knight." model kit.

* One bottle of this paint is required for a full paint job on the VSMS 1/100 "Daccas The Black Knight." model kit. (The kit's exterior parts are molded green-black, so one or two coats are sufficient for color development.)

The amount of paint required may vary depending on the dilution ratio and other painting conditions.

Conditions of use:

[Recommended tool] Airbrush

★ Dilution Ratio

[Recommended additional dilution solvent] Born Paint Thinner Standard No. 6

Precautions for use:

Mix the paint thoroughly before use.

顏色: Daccas 黑騎士綠黑色

特徵:

類別: 硝基油漆

組合推薦系列:

我們建議使用專用的「Born Paint稀釋劑 (標準型) 300毫升」進行稀釋本品。

* 完整噴塗 HSGK 1/72「Daccas The Black Knight」需要三瓶此塗料。

* 完整噴塗 HSGK 1/100「Daccas The Black Knight」需要兩瓶此塗料。

* 完整噴塗 VSMS 1/100“Daccas The Black Knight”需要一瓶此塗料。(此套件的外部零件為綠黑色模具，因此一至兩層即可顯色。)

實際用量會根據稀釋濃度和塗裝環境而有所不同。

使用條件:

[推薦工具] 噴槍

★ 稀釋比例

【建議附加稀釋溶劑】Born Paint漆稀釋液標準 No. 6

使用注意事項:

使用前將油漆徹底攪拌。

Movie:

A collaboration with the much-talked-about "Born Paint"! An exclusive exterior color for the black knight, "Daccas The Black Knight," is finally here!

The "slightly greenish black" exterior color of the HSGK and VSMS "Daccas The Black Knight" is recreated in a translucent "Clear Black" finish.

This highly transparent and vibrant "Clear Black" finish allows you to express the GTM's distinctive "transparency that's only apparent when you get close enough to touch it" to your liking.

This paint was developed in the same grade as "Z.A.P. White" and "MGP Laminate Gold," which use Born Paint's new, high-quality clear "HB Full Gloss Clear."

Highlights of the "Daccas The Black Knight" exclusive color!

- The base color, "Clear Black," perfectly replicates the color sample of the Pro Finisher!
- Recreate the GTM's distinctive translucent armor with ease. Then, by applying a primer or topcoat of pearlescent paint, you can freely adjust the transparency, gloss, and pearlescent effect!

High gloss, high leveling, and high transparency
High leveling prevents brush marks and uneven paint finishes, resulting in exceptionally vibrant gloss! The paint film is less likely to thin or lose its luster after drying!

Low impact on the substrate (base material, paint film)!
Will not corrode plastic! Performance equivalent to "HB Full Gloss Clear"!

High solvent resistance!
Perfect with our own "Finish Clear," as well as clear coats from various other clear paints and overcoats from various pearlescent paints! Resists dissolution even when overcoated, preserving the sense of depth and transparency!

Paint your "Daccas The Black Knight" with our exclusive color!

Like the standard "HB Full Gloss Clear," the "Daccas The Black Knight" exclusive color requires user dilution.

This specification was chosen not only for its ability to adjust the concentration to your liking, but also for its efficient paint consumption, allowing you to complete the large number of parts and volume unique to the HSGK "GTM" series.

Achieve a beautiful finish with this high-gloss, high-transparency clear paint!

* Three bottles of this paint are required to fully paint the HSGK 1/72 "Daccas The Black Knight."
* Two bottles of this paint are required to fully paint the HSGK 1/100 "Daccas The Black Knight."
* One bottle of this paint is required to fully paint the VSMS 1/100 "Daccas The Black Knight." (The kit's exterior parts are molded green-black, so one or two coats are sufficient for full color development.)
* The amount used may vary depending on the dilution concentration and painting environment.

What is "Born Paint"?

This high-quality lacquer-based hobby paint has been on sale since March 2021 by Toamil Co., Ltd.

The lineup continues to expand, with the addition of the high-gloss "Hyper Solid Series" basic colors and the "Plating-like Series" that achieves a finish resembling plating.

Among these, "Born Chrome" and "Born Mirror" from the plating-like series offer an advantage not found in previous paints: they can be overcoated with a clear color after they have completely dried.

Because this allows for adjustments to the shade and shine without compromising the plating look, Volks is also actively using them in paint samples for "F.S.S." 3D objects.

Taking this opportunity, we have jointly developed a color exclusively for "F.S.S." that not only boasts a beautiful gloss, but also high leveling and solvent resistance!

We plan to continue releasing new colors compatible with various "F.S.S." kits.

Stay tuned!