Description
[Adheres slide marks to curved, uneven, and matte surfaces]
Compared to the Mark Fit (Strong) Item: 87135, the effect of softening slide marks has been further strengthened.
It adheres well to curved, uneven, and rough matte surfaces that are difficult to apply marks to, not only improving the finish but also speeding up the process of applying marks.
It also improves adhesion and prevents the marks from floating up (silvering) after drying.
The cap comes with a brush for easy work.
*Please be careful when using over acrylic paint as it may corrode paint.
[Basic specifications]
Square bottle, 40 ml
[How to use]
1. Apply Mark Fit to the area where you want to apply the slide mark.
2. Apply the slide mark on top of the Mark Fit.
3. Wet your fingers with a little water and move the mark to the correct position while wetting it.
4. Remove moisture by squeezing out any air bubbles inside the mark with a soft cloth or cotton swab.
5. Apply Mark Fit again on top of the mark and blend it into the surface of the model with a soft cloth or cotton swab.
6. Do not touch the mark until it is completely dry.
