Micro Cera Blade G-12 [陶瓷筆刀]

G-12 Micro Cera Blade ~ Ceramic hand tools ideal for deburring, seam processing, etc.

This ceramic hand tool is ideal for deburring and removing parting lines.

Because it is made of ceramic, there is no need to worry about cutting your hands, and it will not gouge too deeply into molded parts.

The tool has two blades, a straight blade and a round blade, on both sides, so use the appropriate one depending on the application.

The blades can be replaced by turning the metal part.

Be careful not to use too much force, as the blade may break if you use too much force.

Contents: 1 Holder (contains 1 ceramic blade)

Ceramic hand tool "G-12 Micro Ceramic Blade"

1. Let's try removing the burr from the circled area.
2. Place the blade at an angle and scrape it down by pulling it towards you.
3. The burr came off easily. It's easy to do without removing too much.

How to change the blade The straight blade and round blade can be used interchangeably & How to replace the blade, you can replace the blade of the Micro Cera Blade easily!

1. Hold the metal part and turn.
2. Once loosened, remove the blade.
3. Replace the blade and retighten.